Description

PowerFlex 525 25B-E0P9N104 — Small 600V Three Phase Drive

Quick note

This is a small PowerFlex 525 drive. It is made for low power three phase motors. It is easy to fit in small panels. We keep stock and can give fast help any time.

Technical parameters

Model25B-E0P9N104
Voltage class525 to 600 VAC, three phase
Rated output current0.9 A continuous
Power0.4 kW approx (0.5 HP)
Output frequency0 to 500 Hz programmable
Speed step0.01 Hz
Speed accuracyabout ±0.2 percent when tuned
Carrier switch1 to 16 kHz adjustable
Control modesV per Hz, sensorless vector, closed loop vector, permanent magnet
SignalsAI 0 to 10 V and 4 to 20 mA, AO 0 to 10 V, PTC, digital I O, relays, transistor outputs
Network portEmbedded EtherNet IP and DSI for multi drive
ProtectionOverload, short circuit, over and under voltage, over temperature, Safe Torque Off
Mount and enclosureFrame A, IP20 open type, panel mount
Operating temp-10 to 50 °C full load. Reduce load above 40 °C per manual.
Storage temp-40 to 85 °C
Humidity5 to 95 percent not condensing
OptionsBrake IGBT, external EMC filter, brake resistor, comms adapters

Short install guide

  • Turn off power before wiring.
  • Mount upright on a flat plate.
  • Keep 30 mm left and right and 50 mm top space.
  • Wire earth first and keep it short.
  • Keep power and signal wires apart.
  • Enter motor data in the menu first.
  • Run a slow test before full load.

Compatibility notes

  • Works with low voltage three phase induction motors.
  • Supports PM motors with correct settings.
  • Use the right fieldbus adapter for your PLC network.
  • Use shielded cables for long analog runs.

Download PDF file here:PowerFlex 520-series AC Drive

Additional information

Weight2 kg
Dimensions17 × 16 × 10 cm

Reviews

There are no reviews yet.


Only logged in customers who have purchased this product may leave a review.

Related Products