Allen-Bradley 22F-RF021-BL AC Drives

Description

Allen-Bradley 22F-RF021-BL PowerFlex 4M EMC Filter Kit

Key technical parameters

Voltage range: 200 to 240 VAC nominal.

Frequency: 50 or 60 Hz.

Rated current: up to 21 A continuous.

Operating temperature: -25 to 70 Celsius.

Storage temperature: -40 to 85 Celsius.

Humidity: up to 95 percent, non condensing.

Leakage current: typically below 5 mA at 240 V.

Line to ground capacitance: typical class values for EMC filters to limit interference.

Insertion loss: typical high attenuation in the 100 kHz to 30 MHz band to cut EMI.

Mechanical frame: Frame B mount. Compact case for panel fit.

Protection rating: suitable for standard control panels. Check panel sealing for harsh sites.

Installation guide

Turn off all power first.

Mount the filter on a flat panel near the drive.

Use the supplied screws and washers.

Connect input lines to the drive input side as labeled.

Keep the filter earth grounded with a short wire.

Do not route control wires next to noisy cables.

After wiring, check tightness and insulation.

Power up and test under no load first.

Download PDF file here:PowerFlex 4M Adjustable Frequency AC Drives