Bently Nevada | 330500-05-CN 330500 Piezo-Velocity Sensor

Description

Bently Nevada
Model 330500-05-CN – Velomitor Piezo-velocity Sensor

Basic Info
Made in the U.S.A.
Mounting thread -05 is not available.
For 1/4-18 NPT mounting, use part 330525.
Approval option -CN is country-specific.

Operating Conditions
Use between 20°C and 30°C (68°F to 86°F) at 100 Hz.
Using outside this range may cause wrong readings.

Electrical Data
Sensitivity: 3.94 mV/mm/s ±5% (100 mV/in/s).
Frequency Response:
– 4.5 Hz to 5 kHz ±3 dB
– 6 Hz to 2.5 kHz ±0.9 dB
Temperature sensitivity changes from -14% to +7.5%.
Velocity range: 1270 mm/s peak (50 in/s).
Side sensitivity is less than 5%.
Linearity: ±2% to 152 mm/s peak (6 in/s).

Mechanical & Output
Resonant frequency above 12 kHz.
Output bias voltage: -12 ±3 VDC.
Output impedance below 2400 Ω.
Noise floor about 0.004 mm/s rms.

Physical & Environmental
Operating temperature: -55°C to 121°C (-67°F to 250°F).
Shock: up to 5000 g peak.
Case sealed for 100% humidity (no water immersion).
Weight: 142 g (5 oz).
Size: Diameter 25.3 mm, Height 63.2 mm.
Case made of 316L stainless steel.
Connector: 2-pin Mil-C-5015, sealed stainless steel.
Mounting torque: max 46 kg·cm (40 in-lb).

Download PDF file here:330500